Stainless Steel Finishing Question?
Posted: 12 Nov 2010, 15:25
First of all, thanks to all here for the invaluable information in the past!
We are finishing a SS vessel to a #4 surface finish and would like to limit the finished surface on each side of the welded seam to approx 2" or less.
My Q is is there a type of tape that will mask of areas that a buffer will not permeate?
Appreciate any comments,
Robert P.
QA Manager
We are finishing a SS vessel to a #4 surface finish and would like to limit the finished surface on each side of the welded seam to approx 2" or less.
My Q is is there a type of tape that will mask of areas that a buffer will not permeate?
Appreciate any comments,
Robert P.
QA Manager