PetroStreet

Hellow Folks!

Can anybody share with me the literature explaining the theory & formula behind CEASER II. If u know some book or literature then send me on engrusmanamin@gmail.com.
I will be grateful to you.

Best Regards,
Usman Amin

Hi Usman,
I would recommend you to go through "Technical Reference Manual" issued by COADE on CAESAR II 5.1.
You would be finding everything in the same.
I have that but it's copyright material.

Ben,

Actually that Manual is really complex & it explains use of CEASER II rather than back theory, thats why I am interested in some other available source if possible.

The theory behind CAESAR II is the same as the manual calculations of piping stress calculation.
I would recommend you to go through a very good book "Pipe Stress Engineering" by L.C. Peng.
One other source is the seminar notes of COADE on CAESAR II. That's too would help you surely.

Thanks do you have the book in soft form, pls send me engrusmanamin@gmail.com

I doubt if the book by L.C. Peng would be available in soft form.
If you have CAESAR II license with you, just write a small email to COADE guys to provide you their notes on CAESAR II.
I have found their notes very elaborative with complete theoretical background which you might have studied back in your engineering college.
And consider it your right to ask for the notes if you do have the license of CAESAR.

Moreover, if you have any specific question regarding the back theory of piping stress analysis, do not hesitate to ask.

You can download the Pipe Stress seminar by COADE from the below link:
http://www.4shared.com/document/ZdeBW01 ... inar_b.htm

@mechcolor can you please share the notes on CEASER II u had got from coade .....

Usman,
I am talking about the same seminar notes for which the link has been given by octane.