PetroStreet

We are planning to buy a thermal imaging camera for the following activities,
1)Corrosion under insulatilon survey
2)Safety relief valve passing/fugitive emission check
3)Furnace tube condition monitoring

I would like to know which make and model is best one for the above service.I understand some cameras are not sensitive in furnace tube real time codition monitoring due to flue gas interference and will show the wrong reading.User feedback is highly appreciated.

with advance thanks,

You should go for any P series IR camera by M/s Flir (preferably P-660).
A trust worthy name in thermography, satisfactory customer feedback and long term reliable performance.

Go for Flir.
You may find the following link useful before selection:
http://www.flir.com/12things/

P-Series
Flir is best.
Regards
NAQ

Where i got information about training course ndt thermography inspection

thanks in advance

Regards,

Maine

You can get much of literature on thermography.
It's better to have some demonstration from some good supplier at your site. Many suppliers can do demos free of cost.

Attached is a presentation on basics & applications of thermography.

And for some theoretical details: