An interesting write-up on fractionation:
Distillation was invented before trays. It relied on flash drums (Fig. 4.1). The drums sep-
arated liquid from vapor, with no entrainment. Each drum was called, “A Theoretical Sep-
aration Stage.” If the separation of vapor and liquid phases was perfect, the drum had a
separation efficiency of 100%. The more drums in series, the greater the degree of sepa-
ration that could be achieved between products. To avoid the mechanical complexity of
many drums, the distillation column was invented.
A tray replaces a drum. If the tray really is working as well as a drum, it has 100% tray
fractionation efficiency. If the tray is only working half as well as the drum, it is said to have
a 50% tray efficiency. The usual cause of low tray efficiency is entrainment due to excessive
vapor velocity.
As the distance between the liquid level on the tray below and the tray above gets smal-
ler, it takes less vapor velocity to blow the liquid from the lower tray, up to the tray above.
For example, when separating propane from butane, the propane product has a butane
specification of 2%. If the vapor rate flowing up through a tower increases, the droplets of
liquid from a lower tray will be entrained and blown up to the tray above. As the liquid in
the lower tray is rich in butane, the entrained droplets will increase the butane content of
the upper tray. As the entrained droplets reach the top tray, the overhead propane product
will be contaminated with butane, thus reducing fractionation efficiency.
A tray is intended to mix vapors and liquids together. The better the mixing, the more
efficient the tray works. Tray efficiency is also a function of:
1. How well the droplets of entrained liquids are separated from the vapor’s flow rising
from the tray deck.
2. How well the bubbles of vapor are separated from the liquid flowing down from the tray
deck through the downcomer.