HIPO - Which one is?

Everything related to Health, Safety & Environmental issues of any Petrochemical industry or Oil & gas sector.
Post Reply
neo
Posts: 129
Joined: 12 Jul 2025, 09:25
Area of interest: Chemical Engineering

HIPO - Which one is?

Post by neo »

How to categorize that what incident is a high potential incident?
Tell me some guidelines both for occupational & process safety please.
ww2i
Posts: 106
Joined: 20 Nov 2025, 21:06
Area of interest: Petroleum Engineering

Re: HIPO - Which one is?

Post by ww2i »

Yes. A High Potential Incident is generally an incident where the actual outcome was less severe than it could reasonably have been, but the credible worst-case outcome could have resulted in a fatality, multiple serious injuries, major fire/explosion, significant environmental impact, or major asset damage.
Classify based on credible potential consequence, not only the actual consequence.
jeem
Posts: 124
Joined: 10 Aug 2025, 17:25
Area of interest: Chemical Engineering

Re: HIPO - Which one is?

Post by jeem »

That majorly depends that how a risk matrix for a company is applied and what is considered high.
Any incident having a potential severity to causes higher consequence is HiPo in very simple terms.
In our case, whatever is considered to potentially cause a single fatality is HiPo on HSE consequence basis.
mechcolor
Posts: 323
Joined: 17 May 2010, 18:05
Area of interest: Manufacturing Engineering

Re: HIPO - Which one is?

Post by mechcolor »

Let me put that in this way:
A High Potential Incident is an unplanned event, including an actual incident or near miss, where the credible worst-case consequence under reasonably foreseeable circumstances could have resulted in a fatality, permanent/life-changing injury, multiple serious injuries, major fire or explosion, significant loss of containment, or other major accident consequence, regardless of the actual consequence.
Post Reply