Foundation settlement - Pressure Vessels

Materials Science, Metallurgy, Welding, NDTs, Reliability Assessment, Failure Analysis, etc.
Post Reply
ivani1
Posts: 103
Joined: 25 May 2025, 14:25
Area of interest: Mechanical Engineering

Foundation settlement - Pressure Vessels

Post by ivani1 »

Does any of the API inspection code of pressure vessels /heat exchangers calls for foundation settlement check? If yes, by what means? To perform some survey with recorded readings?
arcpro
Posts: 387
Joined: 16 Apr 2010, 18:46
Area of interest: Manufacturing Engineering

Re: Foundation settlement - Pressure Vessels

Post by arcpro »

No there is no mandatory /listed requirement in API 510 pressure vessel inspection code to actually perform a settlement survey. In case of storage tanks, applying API 653 yes, it is applicable that settlement survey is performed.
ivani1
Posts: 103
Joined: 25 May 2025, 14:25
Area of interest: Mechanical Engineering

Re: Foundation settlement - Pressure Vessels

Post by ivani1 »

Alright, what are the requirements mentioned in API 653? Is there any particular frequency mentioned to perform settlement survey?
ben
Posts: 242
Joined: 24 Aug 2010, 03:11
Area of interest: Mechanical Engineering

Re: Foundation settlement - Pressure Vessels

Post by ben »

According to Section 12.5 and Annex B of API 653, settlement must be evaluated during every internal inspection (Out-of-Service). If a tank shows visual signs of distress while in service, a survey is triggered immediately.
Post Reply