Is there any API on this?

Materials Science, Metallurgy, Welding, NDTs, Reliability Assessment, Failure Analysis, etc.
Post Reply
ashfaqanwer
Site Moderator
Posts: 434
Joined: 16 Mar 2010, 03:36

Is there any API on this?

Post by ashfaqanwer »

This thread is being initiated only to highlight the relevant API with a certain subject.
Here you may confirm if there any API on this "subject".
Ashfaq Anwer
-thepetrostreet.com
sakib321
Posts: 64
Joined: 02 Aug 2010, 04:06
Area of interest: Metallurgy Engineering

Re: Is there any API on this?

Post by sakib321 »

i have one pdf file of API index and want to share here so mr Ashfaq tell me who i can post here?

its not a copyright material
Sakib Jalal
ashfaqanwer
Site Moderator
Posts: 434
Joined: 16 Mar 2010, 03:36

Re: Is there any API on this?

Post by ashfaqanwer »

You can initiate a new topic "API Index" and place the file there.
No problems.
Ashfaq Anwer
-thepetrostreet.com
Britt
Posts: 4
Joined: 11 Nov 2010, 14:40
Area of interest: Petroleum Engineering

Re: Is there any API on this?

Post by Britt »

Hi I have enjoyed reading the forum. you have very informative posting.I am a API 510,570 & 653 inspector and i have been working in the field for about 30 years. I have some study material for the cert's i have if anyone needs them. also i will be taken the 651 next year if anyone has anything on it please past it on.
Britt
sakib321
Posts: 64
Joined: 02 Aug 2010, 04:06
Area of interest: Metallurgy Engineering

Re: Is there any API on this?

Post by sakib321 »

thanks britt for your sharing i wanna do API 510 and 570 at my own so will you please guide me for it how i should start
Sakib Jalal
Britt
Posts: 4
Joined: 11 Nov 2010, 14:40
Area of interest: Petroleum Engineering

Re: Is there any API on this?

Post by Britt »

Hi Sakib
I am on holiday right now,but i am going back to Canada were i work Monday and i will sent you some study material from there. that is where i keep most of my files.i recommend you do the 510 first that is where most of the money is at.
sakib321
Posts: 64
Joined: 02 Aug 2010, 04:06
Area of interest: Metallurgy Engineering

Re: Is there any API on this?

Post by sakib321 »

thanks britt waiting for your reply
you can have my email id
sakib321@gmail.com
Sakib Jalal
Post Reply