Dear forum members,
we have an incineration unit for the incineration of industrial residual containing toxic element which cannot be disposed otherwise due to environmental implication. Though resultant flue gases are passed through a scrubber for scrubbing of NOx and SOx generated, however there are some unabsorbed quantity of these gases in flue gas leaving through vent stack.
The material of vent stack is CS and it was internally rubber lined, but due to some issues in construction it is not practical.
Can any body suggest any epoxy coating that can serve the purpose of rubber lining?
Thanks in advance
Internal lining for vent stack of incineration unit
Re: Internal lining for vent stack of incinerator unit
I would recommend you to choose any of the amine epoxies having very good acid resistance.
What would be the service temperature?
What would be the service temperature?
-
Imran.Idris
- Core Member
- Posts: 59
- Joined: 16 Mar 2010, 04:22
- Area of interest: Chemical Engineering
Re: Internal lining for vent stack of incineration unit
No problems. Go for amine based epoxy.